1
speaker cable routing guide
3
screws (4)
Replacing the Speakers
1. Follow the procedures in
Before You
2. Place the speakers on the computer base.
3. Replace the four screws (two on each speaker) that secure the speakers to the computer base.
4. Route the speaker cable through the routing guide.
5. Connect the speaker cable to the system board connector.
6. Replace the palm rest (see
7. Connect the Bluetooth board cable to the system board connector (see
8. Replace the Bluetooth card (see
9. Replace the keyboard (see
10. Replace the center control cover (see
11. Replace the Mini-Card (see
12. Replace the memory module(s) (see
13. Replace the module cover (see
14. Replace the hard drive (see
15. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
2
speakers (2)
4
speaker cable connector
Begin.
Replacing the Palm
Rest).
Replacing the Bluetooth
Card).
Replacing the
Keyboard).
Replacing the Center Control
Replacing the
Mini-Card).
Replacing the Memory
Module(s)).
Replacing the Module
Cover).
Replacing the Hard
Drive).
Battery).
Replacing the Bluetooth
Board).
Cover).