Table of Contents
Advertisement
9. Remove the center control cover (see
10. Remove the keyboard (see
Removing the
11. Make note of the Mini-Card antenna cable routing and carefully dislodge the antenna cables from the cable routing slot on the computer. Pull the cables
away, so that they are clear of the palm rest.
1
display cable routing
3
Mini-Card cable routing
12. Disconnect the display cable and camera cable from the respective system board connectors and remove them from their routing guides.
13. Remove the four screws that secure the display assembly to the computer base.
14. Lift and remove the display assembly from the computer base.
Removing the Center Control
Cover).
Keyboard).
2
camera cable routing
Advertisement
Table of Contents
