Table of Contents
Advertisement
Replacing the Keyboard
1. Follow the procedures in
Before You
2. Slide the keyboard cable into the connector on the system board. Press down on the connector latch to secure the keyboard cable to the system board
connector.
3. Align the six tabs on the keyboard with the slots on the palm rest.
4. Place the keyboard on the palm rest.
5. Replace the two screws that secure the keyboard to the palm rest.
6. Replace the center control cover (see
7. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the Center Control
Cover).
Battery).
Advertisement
Table of Contents
