Dell PowerConnect W-Airwave User Manual page 8

•
Navigation
Campus and Building Trigger preferences
Campus, Building, and Floor icon size Vector
•
Locate Now – Queries the AP or controllers for user signal information and recalculates all client
locations. This is different from the Refresh button which does not query the AP or controller.
Icons
Refresh
Report Browser
Preferences
Locate Now
Edit Tools
Icons
Set Orientation
Delete Survey
Resize Floor
Plan APs
Delete APs
Provision APs
Add Walls
Edit Lock
Add Regions
Additionally there are a couple of other controls within QuickView. In the bottom left corner of the
window is the search box and legend pushup. In the top right corner is the zoom control. You can also
zoom by using your mouse wheel as well or the '+ and –' keys. In the bottom right corner are
breadcrumbs related to network, campus, and building.
Figure 2. "Basic Navigation"
8
Refresh the floor plan to see changes
Launch report browser to very location batches or BOMs
Configure personal viewing preferences
Relocate all clients by query controller for client signal info
Set Orientation for proper vertical floor plan alignment.
Remove all surveys (rogue and client) on floor plan.
Change the size of the floor plan.
Manually plan APs onto a floor plan (APs not managed by AWMS).
Remove all access points on a floor plan.
Provision APs onto a floor plan (APs managed by AWMS).
Add walls onto a floor plan.
Edit floor plans by locking of a floor plan by locking it.
Add regions onto a floor plan. Region types include Planning, IDF, Location
Probability, Location Testing and Informational.
Description
Description
Visual RF an d Visual RF Plan | User Guide