Dell PowerConnect W-Airwave User Manual page 41

Figure 47. Drawing Provisioning Polygon"
4. Enter the following information:
Device MFG & Model
PHY Type
User Transmit Power – the average transmit power of the client devices on this floor plan
Office Environment
Desired Data Rate or Required Signal values
Replicate floor plans
1. Navigate back to the Building view by click on the navigation tags in the bottom right corner of the
window.
2. Right click on the floor and select "Duplicate"
3. Enter the following information:
Starting and ending floors
Select the toggles to copy walls, regions, data rates, and AP placement.
Note: starting floor adds one to the highest floor in the building and the ending floor defaults to 10 more than the starting floor.
Figure 48. "Replicate Floor Input"
Figure 49. "Replicate Floors"
Visual RF and Visual RF Plan | User Guide P 41