AP Neighbors – Toggle lines between APs which heard each other.
Tag Neighbors – Toggle lines between WiFi Tags and radios which hear the Tags. For
Tags there is no radio of association.
User Association – Toggle line between the wireless user and AP of association.
Note: All 2.4 GHz lines are blue and 5 GHz lines are green. If both PHYs apply to a line then it is yellow.
Frequency & PHY – select the desired frequency and PHY
•
2.4 GHZ (lines are always blue)
11b
11g
11ng
•
5 GHz (lines are always green)
11a
11na
Options – Buttons
•
Refresh – Refresh client locations.
•
Report Browser – View location accuracy batches or generated BOM reports.
•
Preferences – Provides ability to configure user preferences (overlay types, grid lines, alerts, icon
sizes). User preferences are stored per browser. They can vary between users and between
browsers.
•
General
Enable Auto-Refresh – Will refresh data in the quick view at the specified interval.
Show grid lines and size – Will overlay grid lines at the specified location making it easier
to judge distance.
Show scale – Enable or disable the scale that is displayed in the bottom of the quick view.
•
APs
AP Triggers preferences
Display channel in AP label
Display transmit power in AP label
AP icon size
•
Users
User Trigger preferences
User icon size
•
Overlays – Specify how the overlays should be displayed. Vector will display a smoother image and
break down the overlay into ~5 buckets. Grid will display a higher granularity but will be broken
up into square cells.
Heatmap
Channel
Data Rate
Sensor
Voice
Visual RF and Visual RF Plan | User Guide P
7