Dell PowerConnect W-Airwave User Manual page 40

Manually Provision Access Points
To manually provision access points onto the floor plan:
1. Click on the planning icon within Edit Tools pull down. A new provisioning
popup will appear.
2. Select manufacturer.
3. Drag access points from provision window onto floor plan.
4. Configure antenna gain, beam width, and orientation (optional)
5. Repeat process until coverage planning is complete. Notice that manually
provisioned access points appear with a red question mark below the icon.
6. Click on the save icon (floppy disk) to save the floor plan.
Figure 46. "Unmatched APs"
Automatically provision access points onto floor plan
1. Click on the region drawing icon within Edit Tools pull down. A new provisioning popup will
appear.
2. You will see a new cross hair with circle pointer
3. Draw your polygon
Left click to initiate the process
The tool will automatically shade in your provisioning area
Complete the polygon by double left-clicking the mouse
Once you have finished drawing the region select a type of 'Planning'.
40
Figure 44. "Provision APs"
Figure 45. "Provision APs"
Visual RF an d Visual RF Plan | User Guide