AP View
1.
view an access point's RF environment from Device
2.
Select device of interest
3.
Click on thumbnail – note location of AP in thumbnail should be accurate
Figure 37. "Device
Detail thumbnail"
4.
A QuickView window will open below the thumbnail
Figure 38. "AP
Detail QuickView"
This view is focused on enabling quick resolution of AP issues and therefore disables many RF
objects by default.
RF Objects
•
Users – only users associated with radios within access point of focus are displayed
•
APs – only the access point in focus is displayed
•
Radios – the heatmap represents all radios within the access point of focus
Visual RF and Visual RF Plan | User Guide P
Detail page
35