Dell PowerConnect W-Airwave User Manual page 18

Enter Longitude and Latitude
Distance between floors
Attenuation between floors
User (client device) transmit power
Desired data rate
Address (optional)
Field
Name of the building; located on an existing campus.
Building
Pull down of all campuses configured on your AMP.
Campus
These fields are used to represent a building on Google Earth.
Longitude &
Latitude
The normal distance between floors in the building. This value can be overridden as each floor is
Distance between
created, but this will be the default value for every new floor added to the system. This data
Floors
element can be imported or exported to external planning tools like Ekahau. It is not currently
utilized by AWMS and VisualRF.
Enter the attenuation loss in decibels between floors. This value can be overridden as each floor is
Attenuation
created, but this will be the default value for every new floor added to the system. This data
between Floors
element can be imported or exported to external planning tools like Ekahau. It is not currently
utilized by AWMS and VisualRF.
This value is used when auto-provisioning access points onto a floor plan.
User Transmit
Power
Data rate will determine the new access points when auto-provisioning Greenfield deployment
Desired Data Rate
Building or Campus address.
Address
4. Click on the "OK" button to save. You will see a new Building icon appear in the middle of the
canvas.
5. Drag the Building icon to the appropriate location on the map background.
Note: QuickView automatically saves background map images, campus locations, building locations, and building types.
6. Add appropriate geographical background or upload a personalized image by right-clicking on the
background.
Set Map – allows you to browser with Dell included maps.
Custom – launches the image upload wizard documented below in the Importing Floor
Plans section.
18
Description
Visual RF an d Visual RF Plan | User Guide