Profiles > Aaa > Mac Auth - Dell PowerConnect W-Airwave Configuration Manual

Table 13
Field
Name
Denied Extension Header Filter Items
Match IPv6 Header Type
(0-255)
3. Select Add or Save. The added or edited IPv6 Extension Header profile appears on the IPv6 Extension
Header details page.
Profiles > AAA > MAC Auth
Before configuring MAC-based authentication, you must configure the following:
The user role that will be assigned as the default role for the MAC-based authenticated clients. You configure

the default user role for MAC-based authentication in the AAA profile. If derivation rules exist or if the client
configuration in the internal database has a role assignment, these values take precedence over the default
user role.
Authentication server group that the controller uses to validate the clients. The internal database can be used

to configure the clients for MAC-based authentication.
Perform these steps to configure a MAC Auth profile.
1. Select Profiles > AAA > MAC Auth in the Navigation pane.
2. Select the Add button to create a new MAC Auth profile, or click the pencil icon next to an existing profile to
edit. Complete the settings as described in
Table 14
Field
General Settings
Folder
Name
Other Settings
Delimiter
Case
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
Profiles > AAA > IPv6 Extension Header Profile Settings
Default
Blank
hop-by-hop
Profiles > AAA > MAC Auth Profile Settings
Default Description
Top Set the folder with which the profile is associated. The drop-down menu displays all
folders available for association with the profile.
Blank Enter the name of the MAC Auth profile.
none Delimiter used in the MAC string:




lower The case (upper or lower) used in the MAC string.
Description
Enter the name of the IPv6 Extension Header profile.
Specify one of the following EH types:
authentication: Matches the IPv6 authentication header

dest-option: Matches the IPv6 destination-option header

esp: Matches the IPv6 encapsulation security payload header

fragment: Matches the IPv6 fragment header

hop-by-hop: Matches the IPv6 hop-by-hop header

mobility: Matches the IPv6 mobility header

routing: Matches the IPv6 routing header

Table 14:
colon specifies the format xx:xx:xx:xx:xx:xx
dash specifies the format xx-xx-xx-xx-xx-xx
none specifies the format xxxxxxxxxxxx
oui-nic specifies the format xxxxxx-xxxxxx (use the client device's OUI as a
delimiter) - for 6.1.0.0 versions or later
Configuration Reference | 57