Selecting Dell Powerconnect W Ap Groups; Configuring Dell Powerconnect W Ap Groups; General Wlan Guidelines; Dell Powerconnect W-Airwave 7.5 | Configuration Guide - Dell PowerConnect W-Airwave Configuration Manual

Selecting Dell PowerConnect W AP Groups

To select Dell PowerConnect W AP Groups, navigate to the Dell PowerConnect W Configuration > Dell
PowerConnect W AP Groups page. This page is central to defining Dell PowerConnect W AP Groups, viewing
the AirWave groups with which an AP Group is associated, changing or deleting AP Groups, and assigning AP
devices to an AP Group.

Configuring Dell PowerConnect W AP Groups

Perform the following steps to display, add, edit, or delete AP Groups in Dell PowerConnect W Configuration.
1. Browse to the Dell PowerConnect W Configuration page, and click the AP Groups heading in the navigation
pane on the left. The Groups Summary page appears and displays all current Dell PowerConnect W AP
Groups.
2. To add a new group, click the Add AP Group button. To edit an existing group, click the pencil icon next to
the group name. The Details page appears with current or default configurations. The settings on this page are
described in
3. Click Add or Save to finish creating or editing the Dell PowerConnect W AP Group. Click Cancel to exit this
screen and to cancel the AP Group configurations.
4. New AP groups appear in the AP Groups section of the Dell PowerConnect W Configuration navigation
pane, and clicking the group name takes you to the Details page for that group.
5. When this and other procedures are completed, push the configuration to the Dell PowerConnect W-Series
controllers by clicking Save and Apply. The principles of Monitor and Manage mode still apply. For additional
information, refer to "Pushing Device Configurations to Controllers" on page 23.
Once Dell PowerConnect W AP groups are defined, ensure that all desired WLANs are referenced in Dell
PowerConnect W AP Groups, as required. Repeat the above procedure to revise WLANs as required. You can
add or edit AP devices in Dell PowerConnect W AP Groups, and you can configure AP Override settings that
allow for custom AP configuration within the larger group in which it operates.

General WLAN Guidelines

Guidelines and Pages for WLANs in Dell PowerConnect W Configuration

The Dell PowerConnect W Configuration navigation pane displays custom-configured WLANs and Dell

PowerConnect W AP Groups. You define or modify WLANs on the Dell PowerConnect W Configuration
page. Click WLANs from the navigation pane.
You can create or edit any profile in an WLAN as you define or modify that WLAN. If you digress to profile

setup from a different page, AirWave returns you to your place on the WLAN setup page once you are done
with profile setup.
All configurations must be pushed to Dell PowerConnect W-Series controllers to become active on the

network.

General Profiles Guidelines

ArubaOS elements can be added or edited after an ArubaOS configuration file is imported to AirWave and
pushed to controllers with the steps described in "Setting Up Initial Dell PowerConnect W Configuration" on
page 15.
Profiles in Dell PowerConnect W configuration entail the following concepts or dynamics:
Profiles define nearly all parameters for Dell PowerConnect W AP Groups and WLANs, and Dell

PowerConnect W Configuration supports many diverse profile types.
Some profiles provide configurations for additional profiles that reference them. When this is the case, this

document describes the interrelationship of such profiles to each other.
22 | Dell PowerConnect W Configuration in Daily Operations
"Dell PowerConnect W AP Groups" on page 32.

Dell PowerConnect W-AirWave 7.5 | Configuration Guide