Use this page to control which device settings appear on the Groups pages.
If you want to configure your controllers using templates instead, you should disable Dell PowerConnect W
GUI configuration from the Groups > Basic page and use template-based configuration. See the Templates
chapter of the Dell PowerConnect W-AirWave 7.5 User Guide in Home > Documentation for more
information on templates.
Additional Concepts and Components
Dell PowerConnect W Configuration emphasizes the following components and network management concepts.
Global Configuration and Scope
Dell PowerConnect W Configuration supports ArubaOS as follows:
AirWave supports global configuration from both a master-local controller deployment and an all-master
controller deployment:
In a master-local controller deployment, ArubaOS is the agent that pushes global configurations from
master controllers to local controllers. AirWave supports this ArubaOS functionality.
In an all-master-controller scenario, every master controller operates independent of other master
controllers. AirWave provides the ability to push configuration to all master controllers in this scenario.
Dell PowerConnect W Configuration supports ArubaOS profiles, Dell PowerConnect W AP Profiles, Servers,
and User Roles.
For additional information about these and additional functions, refer to
Guidelines" on
Referenced Profile Setup
AirWave allows you to add or reconfigure many configuration profiles while guiding you through a larger
configuration sequence for an Dell PowerConnect W AP Group or WLAN. Consider the following example:
When you create a new Dell PowerConnect W AP Group from the Device Setup > Dell PowerConnect W
Configuration page, the Referenced Profile section appears as shown in
Figure 13
Dell PowerConnect W-AirWave 7.5 | Configuration Guide
page 23.
Referenced Profile Configuration for a Dell PowerConnect W AP Group
"General Controller Procedures and
Figure
13:
Dell PowerConnect W Configuration in AirWave | 13