Software Verification Function; 7.10 Fax Line Separation Function - Ricoh Aficio MP C4501 Series Manual

Each MFP application
(Copy Function, Printer
Function, Scanner
Function, Document
Server Function and Fax
Function)
7.9

Software Verification Function

The Software Verification Function is to verify the integrity of the executable codes of the MFP Control
Software and FCU Control Software and confirm that these codes can be trusted.
FPT_TST.1
The TOE verifies software at the TOE start-up.
The TOE verifies the integrity of the MFP Control Software first by using the hash and then by checking the
certificate. If the hash does not match its original value or the certificate verification fails, the TOE displays
the error message and becomes unavailable. If the hash matches its original value and the certificate is
verified, the TOE becomes available. The TOE also verifies the integrity of the audit log data files.
The TOE outputs the information used for integrity verification so that the integrity of the FCU Control
Software can be verified. To check the integrity of the FCU Control Software, the information the TOE
outputs will be compared with the information described in the guidance documents, so that the integrity of
the FCU Control Software can be verified.

7.10 Fax Line Separation Function

The Fax Line Separation Function is to receive only faxes as input information from telephone lines so that
unauthorised intrusion from telephone lines can be prevented. This function also can be used to prohibit
transmissions of received faxes so that unauthorised intrusion from telephone lines to the LAN can be
prevented.
FPT_FDI_EXP.1
The TOE receives fax data only as input information from telephone lines. If any communication that does
not comply with the fax protocol is performed, the line is disconnected. Since the TOE is set to prohibit
forwarding of received fax data during installation, received fax data will not be forwarded.
Copyright (c) 2011 RICOH COMPANY, LTD. All rights reserved.
Function type The values specified for each function type is
as follows:
For Copy Function, values to identify Copy
Function.
For Document Server Function, values to
identify Document Server Function.
For Printer Function, values to identify Printer
Function.
For Scanner Function, values to identify
Scanner Function.
For Fax Function, values to identify Fax
Function.
Page 93 of 93