Paper Setup - Dell 5330dn Workgroup Mono Laser Printer User Manual

1.Paper Setup

Paper Size/Type
NOTE: Only installed paper sources are displayed.
This menu selection is used to set the size and type of media loaded into an input tray.
Menu selection: Purpose:
Tray <x> Depending on the paper source
or duplex setting, available
options vary. Select the paper
Size
size currently loaded in the tray.
NOTE: For trays with automatic
size sensing, only the value
detected by the hardware
appears.
Tray <x> Select the paper type currently
loaded in the tray.
Type
MPF Select the paper size currently
loaded in the multi-purpose
feeder.
Size
Values:
Letter* (US) If you loaded the same size and
type of paper in two paper
sources, the trays are
Legal
automatically linked. When one
paper source is empty, paper
Folio
automatically feeds from the next
linked source.
A4* (non-US)
JIS B5
Executive
A5
Custom
Plain Paper* Use this menu item to:
Thick Optimize print quality for the
specified paper.
Thin
Select paper sources through
your software application by
Colored
selecting type and size.
Printed
Automatically link paper sources.
Any sources containing the same
Recycled
type and size of paper are
automatically linked by the printer
if you have set the Paper Size
Bond
and the Paper Type to the correct
values.
Letter Head
Letter (US)
Legal
Oficio
Folio
A4 (non-US)