Changing the Voice of the Song
You can change the Voice of Track 1 or 2 in the cur-
rent Preset Song temporarily to any other desired
Voice.
1
Press the [SONG/AUDIO] button, select
the desired Preset Song, then start play-
back.
2
Hold down the [VOICE] button for longer
than a second to call up the "VOICE
SELECT (MELODY R)" display for
selecting a Voice.
Pressing the [VOICE] button alternates the display
between VOICE SELECT (MELODY R) and
VOICE SELECT (MELODY L), then select the
desired display. Melody R is the Track 1 Voice,
and Melody L is the Track 2 Voice.
Hold for longer
than a second.
3
Rotate the dial to select the desired
Voice.
As you select different Voices, the Melody Voice
of the Song changes while the Song remains the
same.
Specifying the Channel for the
Lesson Part
When using external Songs (only SMF format 0 and
1) in a USB flash memory (or transferred from a com-
puter) for lessons you can specify which channels are
to be played back as the right-hand and left-hand
parts. The default settings are channel 1 for the right-
hand part and channel 2 for the left-hand part.
1
Press the [SONG/AUDIO] button and
select the Song (106–) for which you
want to set the guide track.
2
Press the [FUNCTION] button.
3
Use the CATEGORY [r] and [f] but-
tons to select the "R-Part" or "L-Part."
4
Use the dial to select the channel you
want to play back as the specified right-
or left-hand part.
Song and Audio Settings
DGX-650 Owner's Manual
65