Playing Audio Files Via An External Audio Player - Yamaha Portable Grand DGX-650 Owner's Manual

Owner's manual
Hide thumbs Also See for Portable Grand DGX-650:
Table of Contents

Advertisement

Playing Audio Files via an External Audio Player

You can output the sound of an external audio device, such as a portable music player,
through the built-in speakers of this instrument by connecting it via a cable. This lets
you play the keyboard along with playback of your music player.
CAUTION
• Before connecting, turn off the power of both this instru-
ment and the external audio device. Also, before turning
the power on or off, make sure to set all volume levels to
minimum (0). Otherwise, damage to the devices, electrical
shock, or even permanent hearing loss may occur.
1
Turn off the power for both the external
audio device and this instrument.
2
Connect the audio device to the instru-
ment's AUX IN jack.
Use a cable which has a stereo-mini plug at one
side for connecting to this instrument and a plug
matching the output jack of the external audio
device at the other side.
Stereo mini
plug
NOTICE
• After connecting, first turn on the power to the external
audio device then to this instrument. Reverse this
order when you turn the power off.
3
Turn on the external audio device, then
this instrument.
4
Play back the connected external audio
device.
The sound of the audio device is output through
the speakers of this instrument.
48
DGX-650 Owner's Manual
Audio device (portable
audio player, etc.)
5
Adjust the volume balance between the
audio device and this instrument.
In general, the volume should be adjusted on the
connected audio device.
NOTE
• You can adjust the volume of the sound input via the AUX
IN jack from the external audio device. To do this, Press
the [FUNCTION] button then use the CATEGORY buttons
to select "AUX IN LEVEL, " then adjust the value by using
the dial.
6
Play the keyboard along with the sound
of the audio device.
7
After finishing the performance, stop
playback of the audio device.
8
Make sure to set all volume levels to
minimum (0), then turn the power off to
the instrument then to the audio device.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents