Saving A Registration Memory To Usb Flash Memory - Yamaha Portable Grand DGX-650 Owner's Manual

Owner's manual
Hide thumbs Also See for Portable Grand DGX-650:
Table of Contents

Advertisement

Saving a Registration Memory to USB Flash Memory

This operation saves a Registration Memory to a USB
flash memory device. The file name will have a ".usr"
extension which does not appear in the instrument's
display.
1
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
2
Use the CATEGORY [r] or [f] buttons
to call up "Regist Save."
A default file name will automatically be created.
To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash memory, use the dial or the [+] and [-]
buttons to select the file, then skip ahead to step 5.
NOTE
• Up to 100 User files can be saved to a single USB flash
memory.
3
Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.
Cursor
USB Flash Memory Operations
4
Change the file name as necessary.
The [-] button moves the cursor to the left, and the
[0] button moves it to the right.
Use the dial to select a character for the current
cursor location.
The [+] button deletes the character at the cursor
location.
Cursor
Cursor
Delete
left
right
character
5
Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.
6
Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears.
Registration Memory will be saved in a folder
labeled "USER FILES" which will automatically
be created on the USB flash memory.
NOTICE
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.
NOTICE
• The Save operation cannot be cancelled during execu-
tion. Never turn off the power or disconnect the USB
flash memory during the operation. Doing so may
result in data loss.
7
Press the [EXIT] button to exit from the
FILE CONTROL display.
NOTE
• If you want to recall the Registration Memory (.usr) to this
instrument again, execute the Load operation (page 76).
NOTE
• The amount of time it will take to perform the Save opera-
tion will depend on the condition of the USB flash mem-
ory.
The dial selects
characters
DGX-650 Owner's Manual
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents