Connecting A Usb Flash Memory - Yamaha Portable Grand DGX-650 Owner's Manual

Connecting a USB Flash Memory

1
Connect a USB flash memory to the
USB TO DEVICE terminal, being careful
to insert it with the proper orientation.
A message (information or confirmation dialog)
sometimes appears on the display to facilitate
operation. Refer to the "Messages" on page 79 for
an explanation of each message.
2
Wait for confirmation that the USB flash
memory has been properly mounted.
Mounting
(Flashing)
Mounted
(Lit)
USB Flash Memory Operations
Calling up the FILE CONTROL display
Pressing the [FILE CONTROL] button while the USB
flash memory is connected to the USB TO DEVICE
terminal calls up the FILE CONTROL display.
You can access file operations listed below by pressing
the CATEGORY [r] or [f] buttons from the FILE
CONTROL display.
Menu
Format
Regist Save
User Song Save
Audio Save
Load
USB Delete
User Delete
If you press the [FILE CONTROL] button while an
unformatted USB flash memory is connected to the
instrument, the "Format" function will automatically be
selected.
To exit from the FILE CONTROL display press the
[EXIT] button.
NOTE
• No sound will be produced if you play the keyboard
while the FILE CONTROL display is showing. Also, in
this state only buttons related to file functions will be
active.
NOTE
• The FILE CONTROL display will not appear in any of
the following cases:
• During Style, Song or Audio playback.
• During Lesson and Style Recommender.
• While data is being loaded from a USB flash
memory.
DGX-650 Owner's Manual
Reference page
72
73
74
75
76
77
77
71