Playing Back Audio Files - Yamaha Tyros5-76 Owner's Manual

Playing Back Audio Files

You can play back the following file formats on this instrument.
• WAV.........44.1 kHz sample rate, 16 bit resolution, stereo
• MP3 .........MPEG-1 Audio Layer-3: 44.1/48.0 kHz sample rate, 64–320 kbps and vari-
able bit rate, mono/stereo
If you want to play back an Audio file in USB flash memory, connect the USB flash mem-
ory containing the file to the [USB TO DEVICE] terminal beforehand.
1
Press the AUDIO RECORDER/PLAYER [MODE] button to call up
the AUDIO RECORDER/PLAYER display.
2
Press the [A] (FILE) button to call up the Audio File Selection
display.
3
Select the file you want to play back.
Use the TAB [][] buttons to select the location (HD or USB) where the desired
file is, then press one of the [A]–[J] buttons corresponding to the file.
Viewing Audio file information
Pressing the [7 ] (INFO) button calls up the Information window which you
can view the file name, path, sample rate etc. of the selected red-framed file.
To close the window, press the [F] (OK) button.
4
Press the [PLAY/PAUSE] button to start playback.
5
If you want to make playback-related settings or operations
(page 79), press the [EXIT] button to return to the AUDIO
RECORDER/PLAYER display.
6
To stop playback, press the [STOP] button.
78
Tyros5 Owner's Manual
NOTE
• DRM (Digital Rights Management)
protected Audio files cannot be
played back.
• The Audio files take a slightly longer
time to load than other files.
NOTE
Before using a USB flash memory, be
sure to read "Connecting USB Devices"
on page 101.