Ncu (Mfc-8440/8840D/8840Dn Only) - Brother DCP 8040 - B/W Laser - All-in-One Service Manual

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.19

NCU (MFC-8440/8840D/8840DN only)

(1) Disconnect the connector.
(2) Remove the two cup S M3x6 Taptite screws, and then remove the NCU unit.
Hook
NCU unit
Taptite, cup S M3x6
(3) Remove the cup S M3x6 Taptite screw, and then remove the NCU shield cover.
(4) Remove the two cup S M3x6 Taptite screws, and then disconnect the connector.
(5) Remove the NCU.
NCU shield plate
Taptite, cup S M3x6
NCU
Hook
Fig. 4-92
Taptite, cup S M3x6
Fig. 4-93
4-52
NCU harness
NCU harness
NCU shield cover
Taptite, cup S M3x6