Selector
No.
Printout of the stored image data of
1
an unsent document onto the error
report
Erasure of the stored image data of
an unsent document at the time of
2
the subsequent in-memory
message transmission
3
|
Not used.
8
l
Selector 1:
Printout of the stored image data of an unsent document onto an error report
This selector determines whether or not the 1st-page image data of a document will be
printed out onto the error report if the document image data stored in the temporary memory
cannot be transmitted normally.
l
Selector 2:
Erasure of the stored image data of an unsent document at the time of the
subsequent in-memory message transmission
If in-memory message transmission fails repeatedly when selector 1 is set to "1," the
temporary memory will be occupied with image data.
automatically erase the stored 1st-page image data of an unsent document at the time of the
subsequent in-memory message transmission only when recording paper or toner runs out.
WSW37 (Function setting 15)
Function
A-39
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Setting and Specifications
0: No
1:
Yes
0: No
1:
Yes
Setting selector 2 to "1" will
SERVICE MANUAL