Ncu (Mfc-8440/8840D/8840Dn Only) - Brother mfc8440 Service Manual

3.19

NCU (MFC-8440/8840D/8840DN only)

(1) Disconnect the connector.
(2) Remove the two cup S M3x6 Taptite screws, and then remove the NCU unit.
Hook
NCU unit
Taptite, cup S M3x6
(3) Remove the cup S M3x6 Taptite screw, and then remove the NCU shield cover.
(4) Remove the two cup S M3x6 Taptite screws, and then disconnect the connector.
(5) Remove the NCU.
NCU shield plate
Taptite, cup S M3x6
NCU
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Hook
Fig. 4-93
Taptite, cup S M3x6
Fig. 4-94
4-53
SERVICE MANUAL
NCU harness
NCU harness
NCU shield cover
Taptite, cup S M3x6