Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 155

CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
(16) Remove the two cup S M3x6 Taptite screws and the four bind B M4x12 Taptite screws.
(17) Remove the front chute ASSY.
Taptite, bind B M4x12
(18) Remove the two shoulder taptite bind B M3x7.5 screws from front chute guide ASSY.
(19) Remove the front chute guide ASSY.
(20) Remove the front tray chute ASSY.
(21) Remove the roller 6, pressure roller shaft and roller 6 guide.
Pressure roller shaft
Front chute ASSY
Front chute ASSY
Taptite, cup S M3x6
Roller 6
Roller 6 guide
Front tray chute ASSY
Taptite, shoulder bind B
M3x7.5
Fig. 4-131
2 4
3
1
Front chute guide ASSY
Fig. 4-132
4-74
Taptite, bind B M4x12
Taptite, cup S M3x6
Taptite, shoulder bind B
M3x7.5