Brother DCP 8040 - B/W Laser - All-in-One Service Manual page 86

NOTE:
When replacing/re-assembling the pad holder ZL2 ASSY, remove the old grease and apply a
suitable amount of grease referring to the figure below;
Grease: Molykote PG-662
(4 mm dia.ball)
(4) Remove the four bind B M4x12 Taptite screws, and then remove the paper tray front
cover.
Paper tray
Taptite, bind B
M4x12
Paper pick-up roller
Fig. 4-5
Taptite, bind B M4x12
Hook
Fig. 4-6
4-5
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Paper tray
Paper tray front cover
SERVICE MANUAL
Hook