Connecting A Dvd Or Blu-Ray Player; Using Hdmi (Best) - Insignia NS-19ED200NA14 User Manual

Connecting a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

Using HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
To connect a DVD or Blu-ray player using HDMI:
1 Make sure that your TV's power adapter is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to the HDMI jack on the side or back of your TV and to the HDMI OUT
jack on the DVD or Blu-ray player.
3 Plug your TV's power adapter into a power outlet, then turn on your TV.
4 Turn on the DVD or Blu-ray player, then set it to the correct output mode. For more information, see the
documentation that came with the player.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight HDMI 1 or HDMI 2, then press OK.
Notes
• You can also press HDMI repeatedly to select the DVD or Blu-ray player.
• An HDMI cable carries both audio and video. You do not need to use any
18
NS-19ED200NA14/NS-24ED200NA14 Insignia 19"/24" LED TV/DVD Combo
Back of TV
audio cables.
www.insigniaproducts.com
"What connection should I
HDMI cable
use?" on page 11.
DVD or Blu-ray player