Connect A Dvd Or Blu-Ray Player; Hdmi (Best) - Insignia NS-24ED310NA15 User Manual

Insignia 24" LED TV/DVD Combo

Connect a DVD or Blu-ray player

Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see

HDMI (best)

On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side or back of your TV and to the HDMI
OUT jack on the DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and the DVD or Blu-ray player.
4 Press INPUT to open the INPUT SOURCE list.
5 Press or to highlight HDMI 1 or HDMI 2, then press ENTER.
Note
• An HDMI cable carries both audio and video. You do not need to use any
• You can also press HDMI to select the DVD or Blu-ray player.
Side of TV
audio cables.
www.insigniaproducts.com
"What connection should I
HDMI cable
use?" on page 12.
DVD or Blu-ray player
19