Using the remote control
Installing remote control batteries
To install remote control batteries:
1 While pressing the release latch on the back of
the remote control, lift the battery
compartment cover off of the remote control.
2 Insert two AAA batteries into the battery
compartment. Make sure that you match the +
and – symbols on the batteries with the + and –
symbols in the battery compartment.
3 Replace the battery compartment cover.
34
NS-19ED200NA14/NS-24ED200NA14 Insignia 19"/24" LED TV/DVD Combo
Aiming the remote control
To aim the remote control:
www.insigniaproducts.com
Cautions
•
Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
•
Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
•
Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
•
Do not mix batteries of different types.
•
Do not mix old and new batteries.
•
Remove batteries when the charge is depleted.
•
If the remote control is not going to be used for
an extended period of time, remove the
batteries.
• Point the remote control towards the remote
sensor on the front of your TV.