Using Composite Video (Good) - Insignia NS-19ED200NA14 User Manual

Insignia 19"/24" LED TV/DVD Combo

Using composite video (good)

Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the green
On your TV
Composite Analog audio
video cable cable
connector connectors
Composite Analog
video jack audio jacks
To connect a cable or satellite box using composite video:
1 Make sure that your TV's power adapter is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the COMPONENT IN/AV IN VIDEO/Y jack and L and R AUDIO jacks on
the side of your TV and to the composite video and audio out jacks on the cable or satellite box.
Notes
• The COMPONENT IN/AV IN VIDEO/Y, P
• When you connect the audio using the L and R AUDIO jacks, the audio
4 Plug your TV's power adapter into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press or to highlight Component/AV, then press OK.
COMPONENT IN/AV IN VIDEO/Y jack.
connect a component device) share the L and R AUDIO jacks with the
COMPONENT IN/AV IN VIDEO/Y jack (used to connect a composite
device).
output is analog.
www.insigniaproducts.com
Side of TV
, and P video jacks (used to
B R
Cable or
satellite box
AV cable
15