Adding Or Changing A Channel Label; Checking The Digital Signal Strength - Insignia NS-19ED200NA14 User Manual

Adding or changing a channel label

If a channel is not already labeled, you can label the
channel to make it easier to identify. You can also
relabel a channel that is already labeled.
To add or change a channel label:
1 Press TV-MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then
press or OK. The CHANNELS menu opens.
3 Press or to highlight Channel Labels, then
press OK. The CHANNELS · CHANNEL LABELS
screen opens with the channel number field
highlighted.
4 Press or to select the channel you want to
label, then press
field.
5 Press or to select a character, then press
or to move to the previous or next character
position. Repeat this step to enter additional
characters. You can enter as many as 11
characters.
6 When you have completed the label, press OK.
A message asks if you want to save the label.
Select Yes, then press OK.
7 Press EXIT to close the menu.
50
NS-19ED200NA14/NS-24ED200NA14 Insignia 19"/24" LED TV/DVD Combo
to move to the channel label
www.insigniaproducts.com

Checking the digital signal strength

You can check the digital signal strength to
determine if you need to adjust your antenna or
digital cable input. The higher the signal strength,
the less likely you are to experience picture
degradation.
To check the digital signal strength:
1 Press TV-MENU. The on-screen menu opens.
2 Press or to highlight CHANNELS, then
press or OK. The CHANNELS menu opens.
3 Press or to highlight Channel Strength,
then press OK. The Channel Strength screen
opens showing the signal strength meter.
4 Press TV-MENU to return to the previous menu,
or press EXIT to close the menu.