Connections - Panasonic WV-CW594 Installation Manual

Connections

Precautions
• The following connections should be made by qualified service personnel or system installers in accordance
with all local codes.
• See the reverse side of the cover page for main lead connection.
• Turn off the power at the fuse box before starting the installation work, or it so could result in fire, electric shock,
personal injury, and material damage.
Data Port (RS485)
Red
Data
Orange
Tx
Yellow
Data
Green
Rx
20
220 V - 240 V AC
(WV-CW590)
24 V AC (WV-CW594)
Data Port (RS485)
(RJ-12)
Video Output
Connector
(BNC)
Alarm Input
Connector
Alarm Output
Connector
*1: For twisted pair cable, use shielded low-impedance cable with a thickness of at
least AWG#22 (0.33 mm
*2: Keep the overall length of coaxial cable under 1200 m (in the case of RG-6/U
(5C-2V)).
*3: Be sure to connect the grounding cable to ground.
*4: Since a female cable is not attached, cut off the connector and connect to the
twisted pair cable of the same type.
Alarm Input Connector
T(B)
T(A)
R(B)
R(A)
(RJ-12)
*5: The type of twisted pair cable is AWG#28.
*6: The type of twisted pair cable is AWG#26.
(Live)
Brown
To the power supply
(Neutral)
Blue
Green/Yellow
GND ( Safety grounding )*3 WV-CW590
GND ( Signal grounding )*3 WV-CW594
Twisted Pair Cable*1
Coaxial Cable RG-6/U (5C-2V)*2
To sensor, etc.*4
To buzzer,
display device, etc.*4
).
2
Alarm In 1*5 (Black)
GND*5 (Brown)
Alarm In 2*5 (Red)
GND*5 (Orange)
Alarm In 3*6 (Yellow)
GND*6 (Green)
Alarm In 4*6 (Blue)
GND*6 (Violet)
To Matrix Switcher,
etc.
To VIDEO IN port
(CAMERA IN)
Alarm Output Connector
Alarm Out 1*5 (Grey)
GND*5 (White)
Alarm Out 2*5 (Pink)
GND*5 (Light Green)