Major Operating Controls - Panasonic WV-CW594 Installation Manual

Major operating controls

Camera Safety
Wire
Rear Sun Shield
(provided)
This part cannot
removed.
Ensuring Trouble-free Operation
• This camera uses a "slip ring" for transmission of electrical power and signals. A dirty slip ring can cause
deterioration of picture quality during panning and generation of noise.
In order to ensure trouble-free camera operation, make sure that the cleaning function is turned on. Refer to the
operating instructions (PDF).
• If cleaning the slip ring does not eliminate poor picture quality and noise, it could mean that the slip ring has
reached the end of its service life. Contact a qualified service person or system installer to have it replaced.
Attachment Pipe
Front Sun Shield
(provided)
OPEN LOCK
LOCK
Sun Shield (pre-attached at factory)
Lens The lens cannot replaced.
Dome cover (do not remove)
Alarm Input
Connector
Alarm Output
Connector
Video Output
Connector
Data Port (RS485)
Power Cable
Housing Base
9