System Configuration; Ata Interface; Drive Connection; Drives Connection - Fujitsu MHR2010AT Product Manual

Device Configuration

2.2 System Configuration

2.2.1 ATA interface

Figures 2.3 and 2.4 show the ATA interface system configuration. The drive has
a 44pin PC AT interface connector and supports PIO mode 4 transfer at 16.6
MB/s, Multiword DMA mode 2 transfer at 16.6 MB/s and also U-DMA mode
3/4/5 transfer at 33/66/100 MB/s.

2.2.2 1 drive connection

2.2.3 2 drives connection

Note:
When the drive that is not conformed to ATA is connected to the disk drive above
configuration, the operation is not guaranteed.
2-4

Figure 2.3 1 drive system configuration

(Host adaptor)

Figure 2.4 2 drives configuration

MHR2040AT
MHR2030AT
MHC2032AT
MHR2020AT
MHC2040AT
MHR2010AT
MHR2040AT
MHR2030AT
MHC2032AT
MHR2020AT
MHC2040AT
MHR2010AT
MHR2040AT
MHG2102AT
MHR2030AT
MHC2032AT
MHH2064AT
MHR2020AT
MHC2040AT
MHH2032AT
MHR2010AT
C141-E145-02EN