Device Connection; Figure 3.9 Cable Connections; Table 3.2 Cable Connector Specifications - Fujitsu MHR2010AT Product Manual

Installation Conditions
3.3.2 Cable connector specifications
Table 3.2 lists the recommended specifications for the cable connectors.
ATA interface and power
supply cable (44-pin type)
For the host interface cable, use a ribbon cable. A twisted cable or
a cable with wires that have become separated from the ribbon may
cause crosstalk between signal lines. This is because the interface
is designed for ribbon cables and not for cables carrying differential
signals.

3.3.3 Device connection

Figure 3.9 shows how to connect the devices.
Host system
DC
Power supply
3-10

Table 3.2 Cable connector specifications

Name
Cable socket
(44-pin type)
IMPORTANT
Interface
Power supply cable

Figure 3.9 Cable connections

Model Manufacturer
89361-144
Disk Drive #0
Disk Drive #1
C141-E145-02EN
FCI