Figure 3.7 Fc Switch Connection, A Cluster System Configuration - Fujitsu ETERNUS LT260 User Manual

Chapter 3 Connections
3.3 Connection to a Server via a FC Switch
■ Cluster system
The following figure shows an example of zoning when the LT260 is connected to a cluster system (standby
configuration). Both servers recognize the LT260 controller and drives as the same configuration.

Figure 3.7 FC switch connection, a cluster system configuration

Server A (operating)
Backup software
FC switch
FUJITSU Storage ETERNUS LT260 Tape Library User's Guide -Site Planning-
Server B (standby)
0 2 4
1 3 5
Controller
LT260
FC cable
Zoning for Fibre Channel for server A
Zoning for Fibre Channel for server B
Copyright 2018 FUJITSU LIMITED
Backup software
6
7
41
P3AM-8782-06ENZ0