Directly Specifying An Smb Destination - Konica Minolta bizhub C550 User Manual

Sending a user box document

Directly specifying an SMB destination

Settings can be specified for the following.
Parameter
Host Name
File Path
User Name
Password
Reference
Note
If "Manual Destination Input" (displayed by touching [Security Settings]
on the Administrator Settings screen, then [Security Details]) is set to
"Restrict", [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and
then touch [Send].
2
Touch [PC (SMB)] on the Direct Input tab.
A screen appears, allowing you to type in the host name for the desti-
nation and the file path.
C550
Description
Specify the host name (in uppercase letters) or IP address for the des-
tination. Type using the keyboard that appears, and then touch [OK].
Type the path to the destination folder in uppercase letters.
Type in the user name used to log on, and then touch [OK].
Specify the password. Type using the keyboard that appears, and then
touch [OK].
Check the structure of the folders on the destination computer. This
can be used to directly specify the destination folder.
5
5-15