Bootup Numlock State [On]; Wait For 'F1' If Error [Enabled]; Option Rom Messages [Force Bios]; Int19 Trap Response [Postponed] - Asus H61M-K User Manual

POST Delay Time [3 sec]
This item appears only when you set Full Screen Logo to [Enabled]. This item allows you to
select the desired additional POST waiting time to easily enter the BIOS setup. You can only
execute the POST delay time during Normal Boot. The values range from 0 to 10 seconds.
This feature will only work under normal boot.
Post Report [5 sec]
This item appears only when you set Full Screen Logo to [Disabled]. This item allows you to
select a desired post report waiting time. The values range from 1 to 10 seconds.
2.7.3

Bootup NumLock State [On]

[On]
[Off]
2.7.4

Wait for 'F1' If Error [Enabled]

When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
2.7.5

Option ROM Messages [Force BIOS]

[Force BIOS]
[Keep Current]
2.7.6

INT19 Trap Response [Postponed]

[Postponed]
[Immediate]
2.7.7

Setup Mode [EZ Mode]

[Advanced Mode] Sets Advanced Mode as the default screen for entering the BIOS setup
[EZ Mode]
2-28
Sets the power-on state of the NumLock to [On].
Sets the power-on state of the NumLock to [Off].
The third-party ROM messages will be forced to display during the boot
sequence.
The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
Allows the option ROMs to trap Interrupt 19 during legacy boot.
Allows the option ROMs to trap Interrupt 19 right away.
program.
Sets EZ Mode as the default screen for entering the BIOS setup program.
Chapter 2: Getting started