Rrp 13.5 Exit Pinch Roller - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 13.5 Exit Pinch Roller

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the Envelope Feeder from the printer.
2. Remove the Bottom Cover
3. Remove the Top Chute
4. Carefully pry up on either end of the Pinch Roller until it is free of the mounting.
5. Remove the Exit Pinch Roller.
Exit Pinch Roller
Replacement
Note: Ensure that the hole in the shaft is aligned with the
alignment pin in the mounting.
Phaser 4400 Laser Printer Service Manual
page 7-30.
(RRP 13.1 Bottom Cover
(RRP 13.2 Top Chute
on page 6-157).
on page 6-158).
6-161