Main Drive
RRP 8.1 Main Motor Assembly
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Left Interface Cover
2.
Remove the Left Cover
3.
Remove the Left Plate
4.
Disconnect P/J29 from the Engine Logic Board.
5.
Release Motor Harness from all cable clamps.
6.
Remove the four screws that secure the Main Motor Assembly to the printer and
remove the assembly.
Main Motor Assembly
6-84
page
7-20.
(RRP 1.1 Left Interface Cover
(RRP 1.2 Left Cover
(RRP 1.11 Left Plate
on page 6-7).
on page 6-16).
Phaser 4400 Laser Printer Service Manual
on page 6-6).