Xerox 4400DT - Phaser B/W Laser Printer Service Manual page 11

In the European Union
following the provisions of the Low Voltage Directive 73/23/EEC and its
amendments:
EN 60950 (IEC 950)
following the provisions of the Electromagnetic Compatibility Directive 89/336/EEC
and its amendments:
EN55022:1998
(CISPR 22)
EN61000-3-2:1995
+A1:1998+A2:1998.
(IEC61000-3-2)
EN61000-3-3:1995
(IEC61000-3-3)
EN55024:1998
(CISPR 24)
CISPR 24 Immunity
Phenomena
Electrostatic Discharge
Radio-Frequency
Electromagnetic Field
(radiated)
Fast Burst Transients
Line Surge
Radio-Frequency
Electromagnetic Field
(Conducted)
Line voltage dips
Line voltage drop-out
This product, if used properly in accordance with the user's instructions is neither
dangerous for the consumer nor for the environment. A signed copy of the
Declaration of Conformity for this product can be obtained from Xerox.
x
"Safety of Information Technology Equipment including Electrical
Business Equipment"
"Limits and Methods of measurement of radio interference
characteristics of Information Technology Equipment." Class B.
"Part 3: Limits - Section 2: Limits for harmonic current emissions
(equipment input current less than or equal to 16A per phase)."
"Part 3: Limits - Section 3: Limitation of voltage fluctuations and
flicker in low-voltage supply systems for equipment with rated
current less than or equal to 16A."
"Information technology equipment - Immunity characteristics -
Limits and methods of measurement. "
Basic Standard
IEC61000-4-2:1995
IEC61000-4-3:1995
IEC61000-4-4:1995
IEC61000-4-5:1995
IEC61000-4-6:1996
IEC61000-4-11:1994
IEC61000-4-11:1994
Phaser 4400 Laser Printer Service Manual
Test Specification
6kV Contact, 10kV Air
80-1000 MHz, 3V/m, 80% AM @
1KHz
5/50 Tr/Th ns, 5kHz Rep. Freq
0.5kV on Signal Lines
1kV on AC Mains
Combination wave
2.0kV Common mode
2.0kV Differential mode
0.15 - 80 MHz, 3V, 80% AM @ 1kHz
>95% dip for ½ cycle @ 50 Hz
30% dip for 25 cycles @ 50 Hz
>95% dropout for 250 cycles @ 50 Hz