Sensor (Ttm Media Size) Removal; Sensor (Ttm Tray 3 Feedout) Removal - Lexmark C950 Service Manual

Sensor (TTM media size) removal

This removal procedure can be applied to either TTM tray 3 media tray or TTM tray 4 media tray.
Pull the appropriate TTM media tray from the machine.
1.
Remove the screw (A).
2.
3. Disconnect the cable (B).
Remove the sensor (TTM media size).
4.

Sensor (TTM tray 3 feedout) removal

1. Open the left door.
Remove the lower tray module media transport roller. See
2.
page 4-213.
"Tray module transport rollers removal" on
Repair information
5058-030
Previous
Next
Go Back
4-203