Sensor (Tray 5 Pre Feed) Removal - Lexmark C950 Service Manual

5058-030
Release the hooks securing the sensor (tray 5 media out) (A) to the HCF feed unit assembly (B).
4.
5. Remove the sensor (tray 5 media out) (A).
Note: The sensor (tray 5 media out) (A) may be easier to replace if the upper guide (C) is removed to
provide access.
C
Front

Sensor (tray 5 pre feed) removal

Open the HCF top door.
1.
Open the HCF feed unit assembly.
2.
3. Remove the three screws securing the upper guide (A) to the HCF feed unit assembly (B).
Remove the upper guide (A).
4.
Remove the connector from the sensor (tray 5 pre-feed) (C).
5.
Service Manual
4-386
A
Connector
B
Previous
Next
Go Back