Dynamic (Cable) - D-Link DIR-810L User Manual

Section 3 - Configuration
My Internet
Select Dynamic IP (DHCP) to obtain IP Address information
Connection is:
automatically from your ISP. This option is commonly used for cable
modem services.
Enable Advanced
Click on the checkbox to enable anti-phishing protection against
DNS Service:
fraud and auto-correction of common URL typos.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave
blank if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an IP address
Primary/Secondary from your ISP.
DNS Server: Enter the Primary and secondary DNS server IP addresses assigned
by your ISP. These addresses are usually obtained automatically
from your ISP. Leave blank if you did not specifically receive these
from your ISP.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC
Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-810L User Manual
Internet Setup

Dynamic (Cable)

29