Dynamic (Cable) - D-Link DIR-816L User Manual

Section 3 - Configuration
My Internet
Select Dynamic. IP. (DHCP) to obtain IP Address information
Connection is:
automatically from your ISP. This option is commonly used for
cable modem services.
Host Name: The Host.Name is optional but may be required by some ISPs.
Leave blank if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an IP address
from your ISP.
Primary/Secondary
Enter the Primary and Secondary DNS server IP addresses
DNS Server: assigned by your ISP. These addresses are usually obtained
automatically from your ISP. Leave blank if you did not specifically
receive these from your ISP.
MTU: Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your specific ISP. 1500 is the
default MTU.
MAC Address: The default MAC Address is set to the Internet port's physical
interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required
by your ISP. You can click on Clone.Your.PC's.MAC.Address to replace the Internet port's MAC address with the MAC address of
your Ethernet card.
D-Link DIR-816L User Manual
Internet Setup

Dynamic (Cable)

25