Advanced Network Settings - D-Link DIR-810L User Manual

Section 3 - Configuration
Enable UPnP: To use the Universal Plug and Play (UPnP
the Enable UPnp box. UPnP provides compatibility with
networking equipment, software and peripherals.
Enable WAN Ping
Checking this box will allow the DIR-810L to respond
Respond:
to pings. Unchecking the box may provide some extra
security from hackers.
WAN Ping Inbound Allow All is the default selection from the drop-down
Filter: menu when you check Enable WAN Ping Respond, allowing
you to apply the inbound Filter to the WAN Ping. (Refer to
page 83 for more information about inbound filters.)
WAN Port Speed: You may set the port speed of the Internet port to 10Mbps,
100Mbps, or Auto 10/100Mbps (recommended).
Enable IPV4 Check the box to allow multicast traffic to pass through
Multicast Streams: the router from the Internet (IPv4).
Enable IPV6
Check the box to allow multicast traffic to pass through
Multicast Streams:
the router from the Internet (IPv6).
D-Link DIR-810L User Manual

Advanced Network Settings

) feature check
™
90