Tools; Admin - D-Link DIR-810L User Manual

Section 3 - Configuration
This page will allow you to change the Administrator password and also enable Remote Management.
Admin Password: Enter a new password for the Administrator login name. Enter again to
verify the password.
Gateway Name:
Enter a name for your router.
Enable Graphical Enables a challenge-response test to require users to type letters or numbers
Authentication: from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router's network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means to
connect to the router, you must enter https://192.168.0.1 (for example)
Server:
instead of http://192.168.0.1.
Enable Remote Remote management allows the DIR-810L to be configured from the
Management: Internet by a web browser. A username/password is still required to access
the Web Management interface.
Remote Admin Port: The port number used to access the DIR-810L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-810L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the
URL to access the router remotely.
Remote Admin Select Allow All or Deny All from the drop-down menu.
Inbound Filter:
Details: This field will display the current remote admin filter.
D-Link DIR-810L User Manual

Tools

Admin

94