Dynamic (Cable) - D-Link DIR 635 B3 User Manual

Section 3 - Configuration
My Internet Select Dynamic IP (DHCP) to obtain IP Address
Connection:
information automatically from your ISP. Select
this option if your ISP does not give you any IP
numbers to use. This option is commonly used
for cable modem services such as Comcast
and Cox.
Host Name:
The Host Name is optional but may be required
by some ISPs. Leave blank if you are not sure.
Use Unicasting:
Check the box if you are having problems
obtaining an IP address from your ISP.
Primary/
Enter the primary and secondary DNS server
Secondary DNS
IP addresses assigned by your ISP. These
Server:
addresses are usually obtained automatically
from your ISP. Leave at 0.0.0.0 if you did not
specifically receive these from your ISP.
MTU:
Maximum Transmission Unit - you may need to
change the MTU for optimal performance with your specific ISP. 1500 is the default MTU.
MAC Address:
The default MAC Address is set to the Internet port's physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's
MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card.
D-Link DIR-635 User Manual

Dynamic (Cable)

18