Manual Configuration; Dynamic (Cable) - D-Link DIR-615 User Manual

Section 3 - Configuration
If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter
the correct configuration parameters. Click the Save.Settings button when you have configured the connection.
My Internet Connection:
Select Dynamic.IP.(DHCP) to obtain IP Address information automatically
from your ISP. Select this option if your ISP does not give you any IP numbers
to use. This option is commonly used for cable modem services such as
Comcast and Cox.
Enable Advanced DNS Advanced Domain Name System (DNS) services enhances your Internet
Service: performance by getting you the information and web pages you are looking
for faster and more reliably. In addition, it improves your overall Internet
experience by correcting many common typo mistakes automatically, taking
you where you intended to go and saving you valuable time.
Disclaimer: D-Link makes no warranty as to the availability, reliability,
functionality and operation of the Advanced DNS service or its features.
Host Name:
The Host Name is optional but may be required by some ISPs. Leave blank
if you are not sure.
Use Unicasting:
Check the box if you are having problems obtaining an IP address from
your ISP.
Primary/Secondary DNS Enter the Primary and secondary DNS server IP addresses assigned by your
Server:
ISP. These addresses are usually obtained automatically from your ISP. Leave
at 0.0.0.0 if you did not specifically receive these from your ISP.
D-Link DIR-615 User Manual

Manual Configuration

Dynamic (Cable)

18