Specification - FujiFilm Pivi MP-300 Owner's Manual

Specifi cation
FUJIFILM Mobile Printer Photo Pack
Photo pack used
FUJIFILM instax digital film (pivi)
61 × 46 mm (2.4 × 1.8 in.)
Image size
(Film size: 86 × 54 mm (3.4 × 2.1in.))
Film counter (shows remaining shots)
Power supply (POWER button)
ERROR lamp
Display LOW BATTERY lamp
SHARPEN lamp
DATE lamp
PictBridge lamp
POWER button (power supply)
REPRINT button (reprints the last image)
Control buttons SHARPEN button (SHARPEN Mode/Image
editing)
DATE button (DATE Mode/Date printing)
IrDA (IrSimple/FIR, SIR)
Interface
USB (PictBridge)
3-color (RGB) LED exposure with liquidcrystal
Recording method
shutter
Printing levels 256 levels per color (RGB)
Supported image
JPEG
format
Printable image
60 × 60 to 6400 × 6400 pixels
sizes
IrDA (FIR, SIR/IrSimple bidirectional mode) and
Max. supported file
USB: Unrestricted
size
IrDA (FIR IrSimpleShot): Up to 1 MB (c)
50
Image enhancement Image Intelligence™
functions SHARPEN Mode
Image recording - photo output (fed out):
Printing time
Approx. 20 sec.
Using infrared communication only: Approx. 100
Possible number of prints (under FUJIFILM test conditions)
prints Using PictBridge communication only: Approx.
70 prints (under FUJIFILM test conditions)
Two CR2 lithium batteries
Power supply
AC power adaper (optional: AC-5VX)
Power consumption 3.0 W (writing/feeding)
Using batteries as the power supply: 3 minutes
Auto Power Off
Using the AC power adapter as the power
delay
supply: 10 minutes
Operating +5°C to +40°C (no condensation)
temperature (+41°F to +104°F)
Dimensions 146 × 102 × 29 mm (5.7 × 4.0 × 1.1 in.)
Weight (without
batteries and photo 225 g
pack)
c SIR IrSimpleShot is not supported.
x Specifi cations are subject to change without notice.
FUJIFILM shall not be held liable for damages resulting from errors in this
owner's manual.
51