Troubleshooting - FujiFilm FinePix Z1 Owner's Manual

Troubleshooting

Troubleshooting Possible causes
Frame erase does not Some frames may be protected.
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Screens are not A language other than English is selected in
displayed in English. the " " setting in the "
menu (➡P.74).
There is no image or i The included A/V cable was connected
sound on the TV. during movie playback.
i The camera is not connected to the TV
correctly.
i "TV" is selected as the TV input.
i The video output setting is incorrect.
i The TV volume is turned down.
The TV image is black The video output setting is incorrect.
and white.
When connecting the i The USB cable (mini-B) is not correctly
camera to a PC, the connected to the PC or cradle.
i The PC is not turned on.
photographed image or
playback image appears
on the camera's LCD
monitor.
Nothing happens when i Camera malfunction.
using the Mode switch.
i The battery has run out.
The camera no longer The camera has suffered an unforeseen
works correctly. problem.
" ® " is not selected in USB mode in the
Can't print with
˜
PictBridge. " " SET-UP menu.
The camera was
connected to a PC
when the USB mode
®
was set to " ".
104
Solutions
Unprotect frames using the camera on
which the protection was first applied.
1Press the "MENU/OK" button to display
˜
" SET-UP the menu.
˜
2Press " a " or " b " to select " " SET-UP
and press " ".
c
ô
3Press " a " or " b " to select " "
4Press " c ".
5Press "
a " or " b " several times to select
"ENGLISH".
6Press the "MENU/OK" button.
i After the movie playback mode is stopped,
connect the camera and TV correctly.
i Connect the camera and TV correctly.
i Set the TV input to "VIDEO".
i Change the setting to "NTSC" or "PAL"
(➡P.74).
i Adjust the volume.
Change the setting to "NTSC" or "PAL"
(➡P.74).
i Set up the camera, and connect the USB
cable (mini-B) correctly.
i Turn the PC on.
i Briefly remove the battery or disconnect
the AC power adapter and cradle. Then
reload the battery, or reconnect the AC
power adapter and cradle, and try again.
i Load a new or fully charged battery.
Briefly remove the battery or disconnect the
AC power adapter and cradle. Then reload
the battery, or reconnect the AC power
adapter and cradle, and try again. If the
message still appears, contact your
FUJIFILM dealer.
Select " ® " in USB mode in the " ˜ " SET-
UP menu.
Perform steps 1 to 3 to remove the
camera from the PC.
h Windows
1 The "Found New Hardware" wizard or
"Scanner and Camera" wizard appears. If
the wizard does not appear, proceed to
step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the
Macintosh.
Specifications
System
Model
Effective pixels
CCD
Storage media
File format
.
Number of recorded pixels
Lens
Focal length
Digital zoom
Aperture (Wide-angle)
Focal range
Sensitivity
Photometry
Exposure control
Scene position
Exposure compensation
Shutter speed
Focus
White balance
Self-timer
Flash type
Flash mode
LCD monitor
Movie
Photography functions
Playback functions
Other functions
Digital camera FinePix Z1
5.1 million pixels
1/2.5-inch Super CCD HR
Number of total pixels: 5.22 million pixels
xD-Picture Card (16/32/64/128/256/512 MB/1 GB)
Still image: DCF-compliant
Compressed: Exif ver.2.2 JPEG, DPOF-compatible
✽ Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Audio: WAVE format, Monaural sound
Still image: 2592 × 1944 pixels/2736 × 1824 pixels/2048 × 1536 pixels/
1600 × 1200 pixels/640 × 480 pixels (
÷
Fujinon 3× optical zoom lens
F3.5-F4.2
f=6.1 mm-18.3 mm
(Equivalent to approx. 36 mm-108 mm on a 35 mm camera)
„
( : Equivalent to approx. 38 mm-114 mm on a 35 mm camera)
Approx. 5.7× (3× optical zoom lens is used together: Max. zoom scale: 17.1×)
F3.5/F5/F8 3 steps
Normal: approx. 60 cm (2.0ft.) to infinity
Macro: approx. 8 cm (3.1 in.) to 80 cm (2.6 ft.) (wide-angle)
approx. 45 cm (1.5 ft.) to 80 cm (2.6 ft.) (telephoto)
AUTO/Equivalent to ISO 64/100/200/400/800
TTL 64-zones metering
Program AE
À m ,
(NATURAL LIGHT), (PORTRAIT), (LANDSCAPE),
(NIGHT)
s
–2 EV to +2 EV in 1/3 EV-step increments ( )
4 sec. to 1/1000 sec. (depend on Exposure mode)
Mode: Auto focus
AF system: TTL contrast-type
AF frame selection: AF (CENTER), AF (MULTI)
Automatic scene recognition/Preset (Fine, Shade, Fluorescent (Daylight),
Fluorescent (Warm White), Fluorescent (Cool White), Incandescent)
Approx. 10 sec./2 sec.
Auto flash
Effective range (AUTO): Wide-angle: approx. 30 cm-3 m (1.0 ft.-9.8 ft.)
Telephoto: approx. 60 cm-2.3 m (2.0 ft.-7.5 ft.)
Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash, Slow Synchro,
Red-Eye Reduction + Slow Synchro
2.5 inches, Aspect ratio: 4:3; approx. 115,000 pixels Amorphous silicon TFT,
Approx. 100% coverage
640 × 480 pixels/320 × 240 pixels (
% / $ )
(30 frames per second with monaural sound)
A series of continuous image can be recorded up to available recording time per
xD-Picture Card. Zoom cannot be used during movie recording.
High-speed shooting, Best framing, Post shot assist window, Frame No. memory
Trimming, Image rotate, Automatic playback, Multi-frame playback, Sorting by
date, Voice memo
II
PictBridge, Exif print, PRINT Image Matching , Language (English, Francais,
Deutsch, Español, Italiano, , ), World time (Time difference), FinePix
photo mode (p-mode)
/ „ / 3 / 2 / ` )
. ©
(SPORT),
105