Fi Increasing Monitor Brightness - FujiFilm FinePix Z1 Owner's Manual

PHOTOGRAPHY FUNCTIONS
fi INCREASING MONITOR BRIGHTNESS
This is useful when checking the shot composition for dark scenes (Slow synchro shots, etc.).
1
2
N N N 1 1 1 1 2 2 2 2
UP UP
38
Available Photography modes:
AUTO, À, m, ,, ., ©, s
q
Set the Mode switch to " ".
fi
Press the " (a)" button.
fi
" " appears on the LCD monitor and the subject is
displayed brightly.
To cancel increased brightness:
fi
Press the " (a)" button again.
This function is automatically cancelled after each
shot.
●
!
When this function is active, it will increase the amount of
speckling in images on the LCD monitor. This is normal and
does not affect the photographed image.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
!
Even if you increase the brightness in low-light conditions,
you cannot check the subject.
●
!
The color tones may vary depending on the subjects.
p PHOTO MODE PHOTOGRAPHY
˘ QUALITY MODE ( NUMBER OF RECORDED PIXELS )
1
1 0 0 2
2
1 0 0 2
Q U A L I T Y Q U A L I T Y
： N F F
A U T O A U T O A U T O A U T O N
S T D S T D S T D S T D
P H O T O M O D E P H O T O M O D E P H O T O M O D E P H O T O M O D E
3
1 0 0 2
2 3 9 2 x 1 9 2 2 2 3 9 2 3 9 2 x 1 9 2 2 2 3 9 2 x 1 9 2 2 x 1 9 2 2
1 9 F R A M E S 1 9 F R A M E S
： N F F
A U T O A U T O A U T O A U T O N
S T D S T D S T D S T D
P H O T O M O D E P H O T O M O D E P H O T O M O D E P H O T O M O D E
q
1 Set the Mode switch to " ".
p
2 Press the " " button to display the menu on the
LCD monitor.
The quality setting is retained even when the
camera is off or the mode setting is changed.
1 Press "a" or "b" to select " ˘ " QUALITY.
2 Press "c".
1 Press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
●
!
The numbers to the upper right of setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.24).
3
39